Single Instruction, Multiple Data (SIMD) in .NET
What is SIMD?
SIMD stands for “Single Instruction, Multiple Data”. It is a type of parallel processing technique that allows a single instruction to be executed on multiple data elements simultaneously. SIMD enables efficient and high-performance execution of repetitive operations on large sets of data, such as vector and matrix computations.
In SIMD processing, data is divided into smaller elements, often called vectors or lanes. These vectors contain multiple data items that can be processed in parallel. The SIMD processor executes a single instruction on all the data elements in a vector simultaneously, performing the same operation on each element concurrently.
SIMD instructions are typically supported by specialized hardware or instruction sets found in modern CPUs. These instructions are designed to perform arithmetic, logical, and other operations on vectors efficiently. SIMD instructions are commonly used in multimedia applications, scientific simulations, image and signal processing, and other computationally intensive tasks.
SIMD in .NET
SIMD can be used in .NET through the System.Numerics and System.Runtime.Intrinsics namespaces.
In .NET Core 1.0 and later versions, you can use the System.Numerics.Vector<T> class. This class provides SIMD support for a wide range of data types, including integers and floating-point numbers. You can perform SIMD operations using Vector<T> to efficiently process large sets of data in parallel. For example, you can create Vector<T> instances, perform arithmetic or logical operations on them, and access the individual elements of the vector using familiar array-like syntax.
Starting from .NET Core 3.0 and later versions, the System.Runtime.Intrinsics namespace provides access to lower-level SIMD capabilities. The Vector128 and Vector256 structures in this namespace represent SIMD vector types for specific hardware instruction sets, such as SSE (Streaming SIMD Extensions) or AVX (Advanced Vector Extensions). These types allow you to perform more fine-grained control over SIMD operations and take advantage of the full capabilities of the underlying hardware.
Optimizing the sum of the elements in a collection
As explained in my previous article, .NET 7 allows the development of a method that calculates the sum of a collection of any numeric type as follow:
public static class MyExtensions
{
public static T Sum<T>(this IEnumerable<T> source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
{
var sum = T.AdditiveIdentity;
foreach (var value in source)
{
sum += value;
}
return sum;
}
}This is an extension method so it can be used as follow:
var source = Enumerable.Range(0, 100).ToArray();
Console.WriteLine(source.Sum());This simply creates an array with 100 elements ranging from 0 to 99. It writes on the console the sum of all the element of the array.
You can see it working in SharpLab.
Sum of a span of elements
Data to be used in SIMD has to be in the form of a vector. The layout of the data in an enumerable is unknown so the “vectorization” requires copying the data into the vector. For this reason it’s not advantageous to use SIMD on enumerables.
A Span<T> represents a contiguous region of arbitrary memory. This makes it possible to convert to a vector without copies, making it possible to take advantage of the SIMD performance optimizations.
So, lets provide an override of the Sum() method that takes a ReadOnlySpan<T> as a parameter as we are not going to mutate the collection while calculating the sum.
Unfortunately the compiler does not automatically call this new override when the collection is an array. It’s a good idea to provide one more override that takes an array as parameter. It simply cast the array to a span (no copies) and call the other override.
If an array is cast to IEnumerable<T>, the first method will be called and SIMD will not be used. It’s a good idea to check inside this method if the collection is actually an array and call the new override so that SIMD is used on this collection.
public static class MyExtensions
{
public static T Sum<T>(this IEnumerable<T> source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
{
// check if the enumerable is an array
if (source.GetType() == typeof(T[]))
return Sum(Unsafe.As<T[]>(source));
var sum = T.AdditiveIdentity;
foreach (var value in source)
{
sum += value;
}
return sum;
}
// overload that takes an array
public static T Sum<T>(this T[] source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
=> Sum<T>(source.AsSpan());
// overload that takes a span
public static T Sum<T>(this ReadOnlySpan<T> source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
{
var sum = T.AdditiveIdentity;
foreach (ref readonly var value in source) // use ref to avoid value-type copies
{
sum += value;
}
return sum;
}
}You can see it working in SharpLab.
Now we can finally add the SIMD optimizations to the Sum() override dedicated to ReadOnlySpan<T> and have the guarantee that it’s used on every case that it may be useful.
Optimisations using System.Numerics.Vector<T>
The collection must be “vectorized” so that SIMD can be used. In our case, where the type of the collection elements is not known, the use of System.Numerics.Vector<T> makes it much easier to understand the code than using the lower-level System.Runtime.Intrinsics API:
public static class MyExtensions
{
public static T Sum<T>(this IEnumerable<T> source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
{
if (source.GetType() == typeof(T[]))
return Sum(Unsafe.As<T[]>(source));
var sum = T.AdditiveIdentity;
foreach (var value in source)
{
sum += value;
}
return sum;
}
public static T Sum<T>(this T[] source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
=> Sum<T>(source.AsSpan());
public static T Sum<T>(this ReadOnlySpan<T> source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
{
var sum = T.AdditiveIdentity;
// check if SIMD is available and can be used
if(Vector.IsHardwareAccelerated && Vector<T>.IsSupported && source.Length > Vector<T>.Count)
{
var sumVector = Vector<T>.Zero; // initialize to zeros
// cast the span to a span of vectors
var vectors = MemoryMarshal.Cast<T, Vector<T>>(source);
// add each vector to the sum vector
foreach (ref readonly var vector in vectors)
sumVector += vector;
// get the sum of all elements of the vector
sum = Vector.Sum(sumVector);
// find what elements of the source were left out
var remainder = source.Length % Vector<T>.Count;
source = source[^remainder..];
}
// sum all elements not handled by SIMD
foreach (ref readonly var value in source)
{
sum += value;
}
return sum;
}
}You can see it working in SharpLab.
The code added to the third method will only be execute if hardware acceleration (SIMD) is provided by the hardware device and if the type T is supported. The JIT compiler will actually remove all this extra code when any of the two conditions is false. Meaning that there’s no performance penalty when not used.
The size of Vector<T> may vary depending on the hardware device but it should only be used if the source is larger than the vector. Otherwise, the code defaults to the usual foreach loop.
To calculate the sum, we have to create sumVector that is a Vector<T> with all the elements initialized to zero.
The method MemoryMarshal.Cast<T, Vector<T>> provides an efficient way, without copies, of converting the source ReadOnlySpan<T> into a ReadOnlySpan<Vector<T>>. We can now use a foreach loop to iterate through the span of vectors. On each step of the loop, the elements of the vector are added to the elements of sumVector. This means, the first element of the vector is added to the first element of sumVector, the second element of the vector is added to the second element of sumVector, and so on.
Once the loop ends, each element of sumVector contains a partial sum of the array elements. We need to call Vector.Sum() that sums all the elements of sumVector, resulting in the total sum of the array elements processed.
NOTE: This portion of the code does not check for overflows or deal with NaN and infinite. I you know how to do it, please let me know in the comments.
We now only have to handle the case where there are elements of source that were left out because they were not enough to fill up one last Vector<T>. To do it efficiently, without copies, we can slice the source, leaving only these last elements. The span resulting from the slice will then be handled by the usual foreach loop, adding to the current sum value.
Optimizing the sum of the List<T> elements
List<T> is a type provided by .NET that is very commonly used. The advantage over arrays is that data can be inserted and appended. Internally it uses an array that grows as needed.
List<T> is an enumerable type so we can use the Sum() we’ve just implemented:
var source = new List<int>(Enumerable.Range(0, 100));
Console.WriteLine(source.Sum());Although List<T> wraps an array, the first Sum() method will be used which is much slower than the third one.
.NET 5 introduced a new method CollectionsMarshal.AsSpan<T>(List<T>). It returns the List<T> internal array as a Span<T>. This means we can use the much more efficient third method to calculate the sum of the elements of a List<T>. We just need to change the code to the following:
public static class MyExtension
{
public static T Sum<T>(this IEnumerable<T> source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
{
if (source.GetType() == typeof(T[]))
return Sum(Unsafe.As<T[]>(source));
// check if the enumerable is a list
if (source.GetType() == typeof(List<T>))
return Sum(Unsafe.As<List<T>>(source));
var sum = T.AdditiveIdentity;
foreach (var value in source)
{
sum += value;
}
return sum;
}
public static T Sum<T>(this T[] source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
=> Sum<T>(source.AsSpan());
// override that takes a list
public static T Sum<T>(this List<T> source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
=> Sum<T>(CollectionsMarshal.AsSpan(source));
public static T Sum<T>(this ReadOnlySpan<T> source)
where T : struct, IAdditionOperators<T, T, T>, IAdditiveIdentity<T, T>
{
var sum = T.AdditiveIdentity;
if(Vector.IsHardwareAccelerated && Vector<T>.IsSupported && source.Length > Vector<T>.Count)
{
var sumVector = Vector<T>.Zero;
var vectors = MemoryMarshal.Cast<T, Vector<T>>(source);
foreach (ref readonly var vector in vectors)
sumVector += vector;
sum = Vector.Sum(sumVector);
var remainder = source.Length % Vector<T>.Count;
source = source[^remainder..];
}
foreach (ref readonly var value in source)
{
sum += value;
}
return sum;
}
}You can see it working in SharpLab.
This code allows SIMD to be used on a List<T> even when cast to IEnumerable<T>.
Results
Lets now benchmark it against the basic implementation of Sum(IEnumerable<T>) without any of the optimizations introduced.
The benchmark compares the following scenarios:
- A List<float> with 10 and 10,000 items,
- .NET 7 and .NET 8,
- With no SIMD support (Scalar), only Vector128 support (Vector128) and with Vector256 support (Vector256).
The use of SIMD, together with the iteration of List<T> as span, totals in performance boosts of:
- 14x faster for 10 items and 6x faster for 10,000 items when hardware acceleration is not available (Scalar jobs).
- 17x faster for 10 items and 27x faster for 10,000 items when Vector128 is available (Vector128 jobs).
- 19x faster for 10 items and 54x faster for 10,000 items when Vector256 is available (Vector256 jobs).
There is a 4x performance improvement when hardware acceleration is not available (Scalar jobs) just by upgrading from .NET 7 to .NET 8. This is an unrelated gain that you get for free by simply upgrading.
Conclusions
The use of SIMD can radically improve performance of arithmetic intensive operations on large amounts of data.
NOTE: This implementation of Sum() should only be used when it’s guaranteed that the sum will not overflow and that the collection does not contain elements that are NaN or infinite. Use LINQ when these are not guaranteed.
The Sum() is just one example where the use of vectorization can be used. I hope you found this article helpful in understanding the concepts so that you can apply to different scenarios in your projects.
For documentation on the more advanced System.Runtime.Intrinsics namespace, check the “Introduction to vectorization with Vector128 and Vector256”.
